#include <ESP8266WiFi.h>
#include <PubSubClient.h>

// Configurations WiFi et MQTT
const char* ssid = "fablab";
const char* password = "geek make code do";
const char* mqtt_server = "192.168.73.20";
const char* mqtt_topic = "brainblast/buzzer/pressed/1";
const char* mqtt_message = "{\"buzzer_id\": 1, \"color\": \"#FF7518\"}";
//hostname wifi et client id mqtt
const char* esp_name = "BUZZER-1";

// Déclaration des broches
#define BUTTON_PIN D8

WiFiClient espClient;
PubSubClient client(espClient);

void setup_wifi() {
  delay(10);
  Serial.println();
  Serial.print("Connexion au WiFi...");
  WiFi.hostname(esp_name);
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println("");
  Serial.println("WiFi connecté");
  Serial.print("Adresse IP: ");
  Serial.println(WiFi.localIP());
}

void reconnect() {
  while (!client.connected()) {
    Serial.print("Connexion au broker MQTT...");
    if (client.connect(esp_name)) {
      Serial.println("connecté");
    } else {
      Serial.print("échec, rc=");
      Serial.print(client.state());
      Serial.println("; nouvelle tentative dans 5 secondes");
      delay(5000);
    }
  }
}

void setup() {
  Serial.begin(115200);
  pinMode(BUTTON_PIN, INPUT_PULLUP);

  setup_wifi();
  client.setServer(mqtt_server, 1883);
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();

  // Vérifier si le bouton est pressé
  if (digitalRead(BUTTON_PIN) == HIGH) {
    Serial.println("Bouton pressé, envoi du message...");
    client.publish(mqtt_topic, mqtt_message);
    delay(200);  // Anti-rebond pour éviter les publications multiples
  }
}